No Items

Terms & Conditions

TERMS AND CONDITIONS

The following conditions of use apply to your use of the American Plaque Company - www.americanplaquecompany.com website ("this website") by American Plaque Company and any company member of its group, (hereinafter referred to as American Plaque Company) and its customers. Your use of the website indicates your acceptance of these terms and conditions. These conditions of use are subject to change by American Plaque Company. American Plaque Company may change the content of its conditions of use at any time without any prior notice to anyone.

By becoming a customer of American Plaque Company, the customer herein agrees to be bound to the conditions of use listed on American Plaque Company.

1. Placing Order / Pricing

Any Quotation made by American Plaque Company is not an offer to sell, and no order given in pursuance of any Quotation shall bind the company unless accepted by it. Unless otherwise agreed in writing, all orders are subject to acceptance by American Plaque Company within seven (7) days of receipt by American Plaque Company of the customer's offer.

Pricing is exclusive of any taxes because this is an international site. Please note that pricing and stock availability are subject to change without prior notice. American Plaque Company reserves the right not to sell below its cost. Errors and omissions excepted.

All orders placed are subject to confirmation and acceptance by American Plaque Company, this includes the pre-paid orders, eg. direct deposit etc.

American Plaque Company may vary prices in the event of price changes or mistakes made by suppliers on reasonable prior notice to you. If American Plaque Company requests payment for increased prices, you may cancel the order by giving notice to American Plaque Company, which must be received within seven days of the announcement of the increase.

To minimize errors and improve efficiency, orders should be placed using our on-line ordering system whenever possible.

Quantity in stock displayed on the web site should be considered as a guide only. Quantity in stock does not take into account the orders already placed which are yet to be processed. It is possible that an order placed earlier will receive the allocation of the part in which the quantity for it showed as in stock at the time of your order. Inventory discrepancy can also affect the accuracy of the stock status displayed on the web site.

Price may vary depending upon location due to freight costs and other logistical requirements.

American Plaque Company reserves the rights to adjust freight cost at any time.

2. Approval Process

Customers who place orders which have custom design items will be sent a picture for approval prior to delivery. The purpose of the approval process is to confirm the color and details of previously supplied or agreed artwork. Should there be any errors then these will be corrected at no extra cost and another picture will be submitted for approval, should a request be made for changes to the original order then these changes will be chargeable at a minimum fee of $30.00 per item.

If there is any question regarding color then the customer can supply Pantone Codes for any or all parts of the order as different monitors will show different color shades.

Please note that once an order is approved in writing, any subsequent errors found after delivery will be the responsibility of the customer.

3. Delivery / Collection

Customers are responsible to have someone at the delivery address to sign for and accept the delivery. Cost for re-delivery attempts will be passed to the customers if the delivery address is unattended at the time of delivery.

It is possible to ensure that a signature is required for all deliveries. Should you require this service, you need to indicate so in the Special Instructions at Check out.

If the address provided with the order is incomplete or incorrect and additional charges are incurred, these will be billed to the credit card used for the original order.

After your order is placed, you will be sent an Email acknowledgment.

4. Delivery Time

Any date quoted for delivery is an estimate only, and unless a guarantee shall have been given by American Plaque Company in writing providing for liquidated damages for failure to deliver by the quoted date, American Plaque Company shall not be liable to the Customer for any loss or damage howsoever arising for failure to deliver on or before the quoted date. The Customer shall accept and pay for Products, notwithstanding any failure by American Plaque Company to deliver by the quoted date.

Goods specially manufactured, must be fully paid for prior to delivery & cannot be returned or exchanged without express approval from American Plaque Company in writing. The latter case would still attract the normal restocking fee.

Custom made items are typically shipped with a 4-6 week period from the confirmation of order.  If you require your item by a specific date we recommend you use the express service.  American Plaque Company is not liable for delays caused by the courier delivery companies.

5. Returns / Refunds / Cancellations / Re-Work

There will be no credit given on order price difference, due to price drops. Please select carefully at the time when you place your order.

There is a $25.00 fee for any refund given on a credit card where an order is canceled.

Products with a unique design cannot be returned and no refund will be given.

Any incorrect, missing or damaged items received must be reported to American Plaque Company within 24 hours of you receiving the delivery. This can only be done by Email or Phone.

If item(s) received is not what was ordered please do not open the sealed package in which it was sent. Any attempt to use the incorrect item will be deemed to be accepted by the customer of the item(s) as a satisfactory substitute for the one that was ordered and no further claim can be raised thereafter.

American Plaque Company owns the title of any extra goods shipped with your order that have been dispatched in error.

If requested by American Plaque Company, the Customer may be required to provide information so American Plaque Company can easily assist the Customer with any monetary refund or cancellation. This information may include member's names, address, home phone, work phone, credit card details and other relevant information required by American Plaque Company. Failure to provide sufficient information may delay the refund or cancellation, American Plaque Company is not to be held responsible for any delays according to the clause provided by American Plaque Company.

Cancellations may be communicated by telephone or email. Saturdays, Sundays and holidays by Email only.

Cancellations for unique design orders will incur a 100% cancellation fee. This is to reflect the labor cost and the unique nature of the product. Cancellations of stock items will incur a 50% restocking fee plus freight costs and should be returned to our distribution point in Indiana in the original packing material, the goods will be checked for damage prior to the refund being made.

All products are manufactured in line with the artwork displayed on the website and pre-approved by the customer before the order is put into production. Any changes to this artwork should be notified to American Plaque Company in writing at the time of placing the order along with the necessary graphics and Pantone color codes. Should there be any re-work required due to a customer request that deviates from the customer approved artwork once production has been started then it will incur a minimum additional fee of $30.00 or 10% of the item's value whichever is the greater.

6. Warranty Claim

Warranty only covers the item(s) sold by American Plaque Company. Warranty does not cover any other equipment used in conjunction with the item(s) sold by American Plaque Company.

All warranties are voided if the returned product is found in any way to be mishandled, misinstalled, modified, tampered, abused, physically damaged or used under conditions for which it was not designed.

The customer is responsible for proper packaging of any returned product(s). All warranties will be void on items are insufficiently or inaccurately packaged. Customer is responsible for all the shipping charges associated with returning the defective merchandise. If any item(s) returned for warranty claim is determined to be physically damaged, the item(s) will be returned to the customer as is.

Customer is responsible for any shipping and insurance cost involved in sending the warranty claim goods back to American Plaque Company. American Plaque Company is not responsible for any parcel missing in transit, on its return back to American Plaque Company.

7. Warranty Turnaround Time

Turnaround time for warranty claims largely depends on the item and the nature of the work to be completed. We will try our best to speed up the process.

8. Payment

Unless otherwise agreed in writing, payment for products supplied shall be made in full by the Customer to American Plaque Company without deduction or demand, prior to manufacture or shipping.

Payment for products ordered through American Plaque Company can be made by wire transfer, credit card or check if ordered in the U.S.

9. Default in Payment

If the Customer defaults in payment to American Plaque Company, then:

The Customer shall pay to American Plaque Company, on demand, interest on any overdue money during the period of default at the rate for the time being fixed under Section 2 of the Penalty Interest Rates Act 1983, and

All moneys owed by the company to American Plaque Company shall become due and payable forthwith without demand, and American Plaque Company may at its sole and absolute discretion suspend the provision of credit to the Customer until all amounts owed by the Customer is paid in full

10. Liability

American Plaque Company shall not be liable to the Customer, or to any other person whomsoever, for any loss or damage whatsoever or howsoever caused arising directly or directly in connection with the Products, other than expressly imposed by statute in terms of which it is not possible to limit or exclude liability.

American Plaque Company expressly excludes liability for consequential loss or damage including but not limited to loss of profit, business, revenue, goodwill or anticipated savings.

11. Retention of Title

The title to the Products will pass to the Customer when payment in full for the Products has been received by American Plaque Company. Until the Customer has paid to American Plaque Company the full purchase price:

The Customer shall hold the Products as bailee for American Plaque Company.

The Products shall be stored at the Customer's risk, and in such manner that they are readily distinguishable from other products owned by the Customer or other persons.

The Customer shall indemnify American Plaque Company against any claim, action, proceeding, damage, loss, costs, expense or liability whatsoever, arising out of the possession, use or disposal of the Products by American Plaque Company, or repossession or attempted repossession by American Plaque Company.

Any sale of the Products shall be effected as bailee for American Plaque Company, and the proceeds of such sale shall be held on trust for American Plaque Company. The proceeds of such sales must be held in a separate account or otherwise clearly identified in the books and records of the Customer.

The Customer shall permit American Plaque Company to inspect the Products, and the records and books of the Customer to the extent that they relate to the Products.

Reserve right of entry to inspect or recover goods owned by American Plaque Company, wherever they are located.

In the event that:

The Products are not paid for in full in accordance with these conditions of use of sale, or any other agreement between American Plaque Company and the Customer; or

The Customer commits any breach of the conditions of use of sale or any other agreement between American Plaque Company and the Customer; or

The Customer receives notice of or reasonably believes that a third person may attempt to levy execution against the products; or

The Customer makes or proposes to make an arrangement with its creditors or is placed under official management, or a petition is presented, or an application filed for the winding up of the Customer, or the Customer ceased to trade, or the Customer (being a natural person) commits an act of bankruptcy, then American Plaque Company may, at any time, without notice to the Customer, and without prejudice to any other right which it may have against the Customer, terminate the contract and the bailment referred to above, and enter upon any premises owned or occupied by the Customer where American Plaque Company reasonably believes the Products may be stored, and repossess the Products without being liable for any damage caused, and subsequently dispose of the Products at its discretion. In this event, the Customer ceases to be liable to American Plaque Company for payment for the Products, If Moneys are recovered in full.

12. Disclaimer

Due to changing market forces and other extenuating circumstances that affect product availability, and price stability, we reserve the right to withdraw any product we advertise and change prices without notice.

Information contained throughout the web pages and in our database is believed to be accurate and reliable at the time of publishing. There may be misprints, human errors, and omissions. We reserve the right to make changes and corrections in prices, products, and specifications without notice.

Images displayed on this web site should be regarded as illustrative and informational purpose only. The actual products are often not identical to the images.

Hyperlinks (URL) provided throughout our product pages can only be used as references only. The products we carry are often not identical as the contents contained in the links. If unsure, This email address is being protected from spambots. You need JavaScript enabled to view it..

13. U.S. Coast Guard Disclaimer

This Website is not an official U.S. Coast Guard site, however, the owner of this Web site is officially licensed with the U.S. Coast Guard. The use of the words U.S. Coast Guard, USCG and other Coast Guard related symbols does not constitute a U.S. Coast Guard endorsement. To reach the official U.S. Coast Guard Website, please visit www.uscg.mil.

14. Obligations of the Customer / Do Not Sell / Privacy Policy 

As a customer of American Plaque Company, the Customer must provide current, complete, and accurate information at all times.

The Customer is entirely responsible for their account which includes confidentiality, any and all activities through using the Customer's account, American Plaque Company will not be held responsible in any manner. American Plaque Company does not sell any customer information.

On the first purchase the Customer places with American Plaque Company, the Customer might be required to provide additional identification to American Plaque Company to help eliminate internet credit card fraud and to provide additional security.

American Plaque Company reserves the right to terminate a Customer's account if it is found to contain false, incomplete, inaccurate information. If any security concerns or breaches arise from the Customer, they shall report it to American Plaque Company immediately.

American Plaque Company does not store any credit card details for any Customers. The Customer will ensure that credit card details are their sole responsibility to safeguard.

15. Provision of Credit

The provision of credit and/or the continued provision of credit by American Plaque Company to the Customer from time to time, shall be in the absolute discretion of American Plaque Company.

American Plaque Company may at its absolute discretion extend credit to the Customer; or

Extend and/or continue to extend credit to the Customer subject to the provision of security in a form acceptable to American Plaque Company; or

May at any time vary or cancel the credit available to the Customer credit account with American Plaque Company Guarantee in place.

16. Differences and Complaints

Subject to the provisions of clause 7, American Plaque Company shall not be liable in respect of any difference or complaint arising out of the conditions of use of sale unless the Customer advises American Plaque Company in writing of the difference or complaints not later than three (3) days after the date of the occurrence of the events or circumstances on which the difference of complaint is based.

17. Waiver

The failure or neglect by American Plaque Company to enforce or waiver the provisions hereof, shall not be constituted nor shall be deemed to be a waiver of American Plaque Company's rights hereunder, nor in any way affect the validity of the whole or any part of the conditions of use of sale, nor prejudice American Plaque Company' right to take subsequent action.

18. Severability

In the event that any part of these conditions of use shall be deemed invalid, unlawful or unenforceable to any extent, such terms or conditions shall be severed from the remaining conditions of use, which shall continue to be valid and enforceable to the fullest extent permitted by law.

19. Express Manufacture & Shipping Orders:

If you have paid for an Express Manufacture & Shipping Service your item will be manufactured within a 2 week period of receiving full payment AND confirmation of artwork by the Customer.  Upon approval by the Customer, the item will be shipped via UPS.  The American Plaque Company is not and cannot be held liable for delays caused by the courier delivery companies.  American Plaque Company also reserves the right to withdraw the Express Shipping Service option on any product ordered and refund the express fee in full.

Company Data

American Plaque Company

59810 Cottonwood
Mishawaka, IN 46544
U.S.A.

Government Point of Contact

Name: John Morgan

Contact No: 574-807-0026

 

Toll Free: 1-800-313-1876

Tel: 574-968-3856

Fax: 419-828-5068 (EFAX)

Email: [email protected]

Legal Business Name: American Plaque Company

Federal Tax ID: 27-2920261

DUNS: 963256842

CAGE/NCAGE: 63V32

NAICS Codes321211, 321999, 337211, 337215, 339950

PSC Codes: 7110, 8455, 9905, 9999

FSC Codes: 8455, 9905